1、首先將圍欄系統和限位拆除，將副鋼絲繩拆除，將一邊吊籠拆除，將帶有天窗一邊的吊籠部件拆除，在吊籠框內用抱箍等把吊桿緊固。
Lift manufacturers introduced first fence system and limit removed, the deputy rope removed, the side of the cage removed, the side of the cage with a skylight parts removed, the box in the cage with a hoop and other fastening the boom.

2、其次把平衡鐵架拆除，然后將第一道纜風繩拆除，在頂框邊綁扎一根長1m的腳手架鋼管并掛上一個可吊重量為0.5T～1T的開口滑輪。把導向掄附件安裝于標準節的側上方。
Second, the balance comes to lift manufacturers formwork removal, then the first wind cable rope removed, lashing at the top rim of a long 1m steel scaffolding and hang a weight hanging pulley opening of 0.5T ~ 1T. The guide picked

accessory mounted on the upper side of the standard section.

3、再拆除曳引鋼絲繩，拆掉曳引輪，裝上拆卸卷筒，將拆卸鋼絲繩從卷筒引出，經過導向輪，頂滑輪后向下，中部系緊于吊桿的內下桿處，末端從吊桿滑輪處引出。
Lift manufacturers say then remove the traction rope, removed the traction wheel, mounted on the reel demolition, the removed the rope from the drum leads, through the guide wheel, pulley after top-down, central lacing on the next shot at the boom , drawn at the end of the boom pulley.

4、最后將標準節逐一拆除，當拆到纜風繩時，要先將纜風繩拆除后方可拆卸標準節，將曳引機構及基礎節拆除。
Lift manufacturers introduced one by one and finally the standard section removed, when split to wind cable rope, first dismantle the wind cable rope standard removable rear section, the traction mechanism and the basis of section

removed.